Cod. BPF-100SI
Hydraulic bench for static/burst tests and pulsing pressure tests without water circulation.
Main features
The BPF series test benches have been designed to carry out single test or life test on hydraulic components.
With the BPF benches is possible to read and measure the hydraulic characteristics in real operative conditions.
The benches are designed to simulate pressure variation with possibility to adjust the water temperature and air chamber temperature, the test are performed according the most relevant international Standards.
It is possible to implemented the benches with additional equipments and software in order to perform flow-rate tests, thermal cycle and traction tests on tubes and hoses, ecc..
AVAILABLE TYPES
BPF-100SI: 1÷100 bar
BPF-250SI: 1÷250 bar
SPECIAL CONFIGURATION ON REQUEST
opz-C: Water supply with vertical pump
opz-Q: Hydraulic plant for flow-rate test and Kv coefficient calculation
opz-HC: Thermo-regulated work chamber with temperature up to 110 °C
opz-HT: Hot water tank with temperature up to 90 °C
opz-TC: Thermal cycle life test with hot and cold tanks and water supply by 1 or 2 pumps
SPECIFIC AVAILABLE DEVICES
opz-PM: Manual pump for initial pressurization
opz-V: Device for vacuum generation
| Executable test | Executable test by installing optional equipment or specific software | Not available | Selected test |
opz-AT: Tubes traction device during endurance test
opz-LVALVE: Hydraulic valve endurance test
opz-CHILLER: Cooling device for cold water tank
opz-DELTA-L: Device for the measurement of elongation of tubes and hoses
| Executable test | Executable test by installing optional equipment or specific software | Not available | Selected test |
opz-EXT-OUT: Hydraulic plant with rear outlet designed to carry out external tests
Cod. BPI-100
Hydraulic bench for static/burst tests and pulsing pressure tests without water circulation and without personal computer
Main features
AVAILABLE TYPES
BPI-100: 0÷100 bar
BPI-250: 0÷250 bar
BPI-600: 0÷600 bar
OPTIONAL TEST DEVICES
opz-V: Device for vacuum generation
