Pressure tests
Pressure tests
Leaktightness pressure test with static pressure, adjustable stabilization time, maximum pressure and pressure slopes. Pressure increase by pressure intensifier.
Codice: P01
Software: AQ2TB-STATICAUT
Tests executable in climatized chamber with air temperature adjustable up to 110 °C and with hot water with adjustable temperature up to 95 °C.
Codice: PT01 e PT01H
Software: AQ2TB-STATICAUT / AQ2TB-STATIC-LT
Tests with hot water (up to 95 °C) in circulation by heat exchanger and water circulator.
Codice: P01-HPF
Software: AQ2TB-STATIC-EH
Water hammer test with adjustables frequency, minimun and maximum pressure. Pressure increase by pressure intensifier.
Codice: P02
Software: AQ2TB-PULSEAUT
Tests executable in climatized chamber with air temperature adjustable up to 110 °C and with hot water with adjustable temperature up to 95 °C.
Codice: PT02 e PT02H
Software: AQ2TB-PULSEAUT
Pulsing pressure test with water circulation, adjustable working pressure, cycle times and pressure slopes.
Codice: P03
Software: AQ2TB-PULSEAUT
Tests executable in climatized chamber with air temperature adjustable up to 110 °C and with hot water with adjustable temperature up to 95 °C.
Codice: PT03 e PT03H
Software: AQ2TB-PULSEAUT
Burst test with adjustable pressure slope and stabilization time.
Codice: P04
Software: AQ2TB-STATICAUT
Tests executable in climatized chamber with air temperature adjustable up to 110 °C and with hot water with adjustable temperature up to 95 °C.
Codice: PT04 e PT04H
Software: AQ2TB-STATICAUT
Tests with hot water (up to 95 °C) in circulation by heat exchanger and water circulator.
Codice: P04-HPF
Software: AQ2TB-STATICAUT
Codice: AXT01
Software: AQ2TB-AT-LAB
Thermal cycles and flow-rate tests
THERMAL CYCLES TESTS
Constant pressure test with variation of the water supply temperature. Adjustable working pressure, minimum water temperature, maximum water temperature and flow-rate.
Adjustable test chamber temperature.
Standard reference: EN 12293.
Codice: TC01
Software: AQ2TB-EN12293
Pulsing pressure test with water supply temperature variation. Adjustable working pressure, minimum water temperature, maximum water temperature and flow-rate.
Adjustable test chamber temperature.
Codice: TC02
Hydraulic valves endurance.
Constant pressure tests, variation of the water supply temperature: adjustable working pressure, minimum and maximum water temperature and flow-rate. Adjustable test chamber temperature.
Control and acquisition of torque and angular speed.
Example of standard reference: EN 13828.
Codice: TC03
Software: AQ2TB-LVALVE
FLOW RATE TESTS
Measurement of the flow-rate of the device under test with linear increase of supply pressure.
Example of Standards reference: EN 200, EN 817, EN 1111.
Codice: F01
Software: AQ2TB-FLOW-LIN
Kv coefficient calculation by mean of linear increase of delta pressure.
Codice: F02
Software: AQ2TB-KV-LAB
Measurement of outlet pressure as a function of flow-rate. Software suitable to test pressure reducers and pumps.
Codice: F03
Software: AQ2TB-P-FLOW
Measurement of flow rate as a function of differential pressure.
Test executed with increase and decrease of differential pressure in order to evaluate the hysteresis of the component under test.
Up to 6 tests can be displayed on the same chart.
Software suitable to test flow regulators.
Codice: F04
Software: AQ2TB-FLOW-DP
Mechanical tests on flexible hoses
Test for evaluate the tensile strength of shower hoses.
Example of Standard reference:
EN 1113 cap. 9.2
Codice: TST01
Test for evaluate the resistance at tensile strength cycles of shower hoses.
Example of Standard reference:
ASME A112.18.1-2012/CSA B125.1-12 chap. 5.6.3.5
Codice: TSC01
Test for evaluate the flexing durability of shower hoses.
Example of Standard reference:
EN 1113 cap. 9.3
Codice: RFL01
